Palm ETHERNET HUB Bedienungsanleitung

KE-5T, KE-5TB,KE-8T, KE-9TB, KE-17TBPLASTIC-PALM10BASE-T ETHERNET HUBUser’s Guide

7Installation Installing the HubThe site where you install the hub may greatly affectits performance. When installing, consider thefollowing pointers

8 Cables and ConnectorsCable characteristics: Category 3 or betterunshielded twisted-pair or EIA/TIA-568 compliant,100-ohm shielded twisted-pair data

9 Crossover CablesWhen making an uplink connection between one hub andanother (or between a hub and a switch or bridge) using X -typejacks at both end

10Specifications GeneralStandards: IEEE 802.3 10BASE-T Ethernet repeater, andANSI X3T9.5 twisted-pair transceiverTopology: StarProtocol: CSMA/CDNet

FCC WarningThis equipment has been tested and found to complywith the regulations for a Class A digital device,pursuant to Part 15 of the FCC Rules. T

Table of ContentsINTRODUCTION... 1PRODUCT FEATURES...

1Introduction Thank you for choosing the PLASTIC-PALM 10BASE-TEthernet Hub. The hub was designed and manufactured to giveyou years of trouble-free and

2 The Front Panel of PLASTIC-PALM HUBs5-port Ethernet Hub5-port Ethernet Hub with BNC port8-port Ethernet Hub9-port Ethernet Hub with BNC port

317-port Ethernet Hub with BNC port The Rear Panel of PLASTIC-PALM HUBs5-port Ethernet Hub5-port Ethernet Hub with BNC port8-port Ethernet Hub

49-port Ethernet Hub with BNC port17-port Ethernet Hub with BNC port LED IndicatorsPower (PWR): This indicator lights green when the hubis receiving p

5station to which the hub is connected ispowered off, or if there is a problem withthe link, the LED will remain off. And theindicator blinking green

6Power JackFor the External power adapter.